These are the new shelves. I had to custom make them in 2 pieces so they could fit through - and inside the opening for the old TV.
Sorry that the backround is close to the same color. If you click on the pictures, you should be able to sea them better.
These are the 2 pieces used for the backboard to cover the wiring and the wood frame that I had previously made. Notice the cut-outs for the 12 Volt recepticle (left), a toggle switch (center) for a cabinet light and the TV Gain control (right). The TV Gain control used to be mounted in the storage area just underneath the TV. We would always forget that it was there when we needed to switch between Cable TV and the TV Antenna. So moving it up here, it is with all the rest of the TV controls and to me, a bit more practical.
These are all the pieces together. The shelves have the wooden angle pieces screwed into them so as to keep items on the shelves from falling off while underway.
This is just a cover plate for the old TV gain control, cut-out space, in the storage space below the new cabinet.
No comments:
Post a Comment